www.acti.com
Hardware Manual
21
Activate via IP Utility
The IP Utility is a light software tool that can not only discover the cameras, but also list lots of
valuable information, such as IP and MAC addresses, serial numbers, firmware versions, etc,
and allows quick configuration of multiple devices at the same time.
The IP Utility can be downloaded for free from
http://www.acti.com/IP_Utility
1. Open
IP Utility
.
2. Check the camera model and then click
Active Device
.
3. On the pop-up window, fill in the required fields to set the new password.
4.
Click
Apply
.
5.
Double-click on the camera model again to enter the login interface.
