![background image](http://html1.mh-extra.com/html/acti/pmax-0318/pmax-0318_installation-manual_2842765014.webp)
www.acti.com
Hardware Manual
14
4.
Unscrew the cover from the bottom hole.
5.
Carefully push the cable through the bottom hole and secure the cable gland on the
bottom hole. Make sure the gland is secured tightly to ensure waterproof.
6.
Remove the three (3) screws, and slightly lift the camera module enough to connect the
power cable wafer (2-wire) on its connector.
NOTE:
Do not abruptly lift the camera module, cables are connected underneath.