USER MANUAL
Safety Instructions
The device must be installed, serviced, and maintained by a trained professional with necessary
safety knowledge and skills. Before you start using the device, please read through this guide
carefully and make sure all applicable requirements are met to avoid danger and loss of property.
Storage, Transportation, and Use
•
Store or use the device in a proper environment that meets environmental requirements,
including and not limited to, temperature, humidity, dust, corrosive gases,
electromagnetic radiation, etc.
•
Make sure the device is securely installed or placed on a flat surface to prevent falling.
•
Unless otherwise specified, do not stack devices.
•
Ensure good ventilation in the operating environment. Do not cover the vents on the
device. Allow adequate space for ventilation.
•
Protect the device from liquid of any kind.
•
Make sure the power supply provides a stable voltage that meets the power
requirements of the device. Make sure the power supply's output power exceeds the total
maximum power of all the connected devices.
•
Verify that the device is properly installed before connecting it to power.
•
Do not remove the seal from the device body without consulting the manufacturer first.
Do not attempt to service the product yourself. Contact a trained professional for
maintenance.
•
Always disconnect the device from power before attempting to move the device.
•
Take proper waterproof measures in accordance with requirements before using the
device outdoors.
Battery Use Caution
•
When battery is used, avoid:
o
High or low extreme temperature during use, storage, and transportation.
o
Extremely low air pressure or low air pressure at high altitude.
o
Battery replacement.
•
Use the battery properly. Improper use of the battery such as the following may cause
risks of fire, explosion or leakage of flammable liquid or gas.
o
Replace battery with an incorrect type.
o
Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of
a battery.
•
Dispose the used battery according to your local regulations or the battery
manufacturer
’s instructions.
