www.acti.com
Hardware Manual
13
Installation Procedures
Before installation, determine the location to mount the camera and the main unit. The main unit
can be installed apart from where the camera is mounted, but should be close enough. Consider
that the camera cable is 3 meters long. Although the camera module is waterproof, the main unit
is not and should be installed indoors.
This section describes procedures in mounting the camera on the ceiling.
NOTE:
There is a plastic film protecting the lens. Do not remove the plastic film until the
installation is complete. However, the plastic film has been removed on the camera
images in this documentation to capture them more clearly.
The camera images on this documentation are for reference only and may be
different from the actual camera.
Step 1: Mount the Bracket
NOTE:
Before installing the bracket, make sure the ceiling or wall can bear more than the weight
of the camera and its accessories.
Install the bracket to the ceiling or wall using the three (3) screws included in the bracket
package.
