www.acti.com
Hardware Manual
17
Step 5: Connect to Network
1.
Connect one end of a network cable to the Ethernet port of the main unit.
2.
Connect the other end to a switch or injector. Then, connect the switch or injector to a
network or PC and a power source. See Power-over-Ethernet (PoE) example connection
diagram below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
In case of using a non-PoE switch, power up the camera using a power adapter (not
supplied). See
Connecting a Power Adapter (Optional)
on page 19 for more information.
3.
As needed, connect and power up other devices, such as digital input/output, audio, or serial
device. See
錯誤
!
找不到參照來源。
on page
錯誤
!
尚未定義書籤。
for more information on
connecting other devices.