www.acti.com
Installation Guide
3
Installation Procedures
This section provides step-by-step procedures in installing the camera using the heavy duty
bracket and how to waterproof the cables.
Before installation, prepare the following tools and accessories which are not included in the
camera package thus must be purchased separately:
Bracket (PMAX-1101)
Flexible Conduit (Trade size = 1/2
”)
Ethernet Cable
Screwdriver
Step 1: Install the Bracket
1.
Remove the screw to detach the camera holder from the bracket. Set the holder aside for
later use.
2.
Attach the bracket to the pole mount using the three (3) screws supplied in the pole mount kit.
