www.acti.com
Hardware Manual
15
Installation Procedures
This section describes procedures in mounting the camera on a flat surface.
NOTE:
The camera images on this documentation are for reference only and may be different
from the actual camera.
Step 1: Prepare for Installation
1.
Before installing the camera, prepare the additional accessories required for installation.
E9xx Models
E9xxM Models
Exterior-grade Ethernet Cable with
RJ-45 connector
(not included; can be
purchased from local stores)
Bundled Cable Gland
Exterior-grade Ethernet Cable with
Waterproof M12 Male Connector
,
D-coding and PoE type A (not included;
can be purchased from local stores)
2.
Depending on the material of the surface where the camera will be installed, it may be
necessary to drill the three (3) screw holes and use the supplied screw tox. In this case,
attach the bundled drill template on the surface and drill the screw holes.
