ACTi E924, Hardware Manual

Page: 11 / 40

www.acti.com
Hardware Manual
11
Item Description
1 Memory Card Slot Insert a memory card (not included) into the slot for local
recording purposes. See How to Install / Remove the Memory
Card on page 25 for more information.
NOTE: Supports only microSDHC and microSDXC cards.
2 Power LED Lights up when the camera is powered up and goes off after the
boot up process is complete
3 Reset Button Restores the factory default settings of the camera. To reset the
camera, while the power is on, press and hold the Reset Button
for at least 5 seconds or until the Power LED lights up.
4 Ethernet Port
(RJ-45)
Connects to a network using an Ethernet cable with RJ-45
connector.
5 Audio Input Connects to audio input devices, such as a microphone with
built-in amplifier, etc. See How to Connect Audio In Device on
page 29 for more information.
NOTE: The microphone must have a built-in amplifier.
Connecting an ordinary microphone will dwarf sounds and will
result in inaudible recording.