www.acti.com
Hardware Manual
18
How to Use the Cable Gland
This section describes how to waterproof the cable-
out or “pigtail” of the camera using the
bundled cable gland. An exterior-grade Ethernet cable is required. The camera may or may not
have to be installed first before doing the cable connections (see related installation
procedures for details).
Before connection, prepare the following materials:
Cable Gland
(included in the camera package)
Washer
(included in the camera package)
Exterior-Grade Ethernet Cable
(not included in the package)
NOTE:
Exterior-grade cables are already waterproof.
Not included in the package.
Use only RJ-45 connectors without sleeve
.
Perform the following to waterproof the “pigtail” using the cable gland:
1.
Disassemble the cable gland as shown below:
Cable Gland
Sealing
Rubber
with claw
Clamping
Nut
