![background image](http://html1.mh-extra.com/html/acti/e413/e413_hardware-manual_2842400017.webp)
www.acti.com
Hardware Manual
17
Step 3: Waterproof and Connect the Cable(s)
The camera and the pre-
installed network cable, “pigtail”, are resistant to salt, water, weak acid,
alcohol, oil, grease and other common solvents. However, users must ensure that the cable
connection and the network side cable itself are also protected from different environmental
factors.
For Ethernet connection, there are two waterproofing methods.
Bundled Accessory
Description
Cable Gland
Use this solution when connecting an Exterior-grade
Ethernet cable between the camera and a
Power-over-Ethernet (PoE) switch or injector. See
on page
Conduit Gland
Use this solution when connecting a standard indoor
Ethernet cable between the camera and a
Power-over-Ethernet (PoE) switch / injector. A flexible
conduit (trade size 1
/2”) is required to house the Ethernet
cable. See
on page 22.
NOTE:
The flex conduit is not included in the package
and must be purchased separately.
Audio and digital input/output devices can be connected to the camera, for more information,
see
Error! Reference source not found.
on page
Error! Bookmark not defined.
.