ACTi ACM-5811 series, Quick Installation Manual

Page: 7 / 14

0-3
transient voltages.
The I/O terminal pins are numbered left to right, as shown below.
Connect input/output devices to the camera as follows:
1. Attach the cables for the device securely to the supplied green
connector block.
2. Once the cables are connected, push the connector block into the
terminal connector (also green) on the camera.
1
2
3
FUSE 1A
NPN
DC TO DC
DI
DO
3.3V
DC POWER
GND
1
2
3
4
CONVERTER
EARTH GND
DO
DI
RELAY
SW
DIODE
DEVICE
-
+
POWER INPUT
CAMERA
6. Power Input
Connect the power adaptor here if your power input is DC12V.
7. Audio Input / Output
The IP device supports audio input and output with earphone jack