background image

 

1-2

 

1.2  Features and Benefits 

This IP device is a cutting-edge digital video transmission device. It can 

compress and transmit real time images with outstanding images quality 

(D1, 720x480) at reasonable bandwidth through a standard TCP/IP network. 

That is because it is Ethernet ready and has the powerful ARM9 SoC and 

the MPEG-4 compression ASIC inside. In addition, with these powerful 

hardware platform, excellent SDK support and powerful respective 

apparatuses (e.g. the transcoder), this IP device is your best choice building 

up either conventional IP surveillance system or intelligent IP surveillance 

system. 

z

 

Real-time MPEG-4 Compression 

With hardware MPEG-4 compression chip inside, the composite video 
inputs can be efficiently compressed into MPEG-4 bit stream without any 
delay. The ASIC base compression engine can support not only CIF, but 
also FULL D1 image resolution. 

z

 

Digital Time Code Embedded 

The “Digital Time Code Embedded” function is to embed the recording 
time in the MPEG bit stream. Therefore, each image frame has its 
respective time when it was recorded. It is very useful when users want to 
find the video at an exact time or between a certain time intervals. 

z

 

DDNS Supported 

This IP device supports DDNS (Dynamic Domain Name Server), users 
can set this IP device at a virtual domain name (such as cam1.Taipei.xxx) 
at dynamic IP. Everyone can use the virtual domain name to view the 
video anywhere that has the access to the internet. 

z

 

Build-in Hardware Motion Detection 

No more external motion sensors are required. Each IP device can be set 
up to 3 detection areas. By tuning the object size and sensitivity, it is very 
reliable to fit into your environment. Besides, hardware motion detection 
delivers better sensitivity and responds faster than software motion 
detection.  

z

 

Bundle Powerful Surveillance Software 

To extend the capabilities of this IP device, a powerful surveillance 
program is included in the package and is very free to use. Users can easily 

Summary of Contents for ACM-1430 series



















Reviews: