background image

 

1-4

 

1.3 Safety 

Instructions 

z

 

Don’t use the power supply with other voltages

 

This device is likely to be damaged or damage other equipments / 
personnel, if you use a power supply with different voltage than the one 
included with this device. All warranty of this product will be voided in 
the situations above. 

z

 

Don’t open the housing of the product 

z

 

Cleaning 

    Disconnect this video product from the power supply before cleaning. 

z

 

Attachments 

Do not use attachments not recommended by the video product 
manufacturer as they may cause hazards. 

z

 

Water and Moisture 

Do not use this video product near water, for example, near a bathtub, 
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a 
swimming pool and the like. 

z

 

Don’t use accessories not recommended by the manufacturer 

z

 

Only install the power supply in a dry place protected from 

weather  

z

 

Servicing  

Do not attempt to service this video product yourself as opening or 
removing covers may expose you to dangerous voltage or other hazards. 
Refer all servicing to qualified service personnel. 

z

 

Damage Requiring service 

Disconnect this video product from the power supply immediately and 

refer servicing to qualified service personnel under the following 
conditions. 

1.

 

When the power-supply cord or plug is damaged. 

2.

 

If liquid has been spilled, or objects have fallen into the video 
product. 

3.

 

If the video product has been exposed to rain or water directly. 

Summary of Contents for ACM-1430 series



















Reviews: