Actel Silicon Explorer II, User Manual, Page: 15 / 42

9
2
Silicon Explorer Software
The Explorer software consists of two components, the Command
module and the Analyze module. The Command module of the
Explore software lists all the observable nets in the FPGA. Use the
Command module to verify that you programmed the correct design in
the FPGA. The Analyze module is an 18-channel logic analyzer that
automatically displays the signals for both probe outputs (and up to 16
additional signals) on the target system.
Figure 2-1. Silicon Explore Window
Signal Name
Bus Control
Zoom Buttons Trigger Position
Status
COM port
Silicon Explorer
Status