EXPLORING ACTWIN
ACTWinPro
Add a new Door
Use the Doors command in the Database menu, or click on the door icon
on
the toolbar to select the door view in the main ACTWinPro screen.
Use the New command
in the Record menu, or click on the new icon on the
toolbar to create a new door record.
The door number will be selected automatically. If a different door number is
required, then it should be changed at this point.
The name of the new door should be entered in the Name field.
The controller to which the new door belongs should be selected from the
Controller drop-down list.
The Local Address of the door should be set. This is the number of the door on
the individual controller. For example, a door on an ACT1000 would always be
given address 1, but on an ACT2000 or ACT3000, the local address could be up
to 16 for doors connected via door stations.
If the door has been already installed, then it can be enabled now by checking
the Enable box.
Any other desired settings may be configured as appropriate, and the new record
should be saved by using the Accept command in the Record Menu or by
clicking on the accept icon
on the toolbar.
The door will appear under its controller in the System Tree on the left.
Page 25
Access Control Technology
Summary of Contents for ACTWIN PRO
Page 1: ......