AcSiP EK-AI7933CLD User Manual Download Page 5

Page: 5 / 27

Product Name

EK-AI7933CLD

Version

Doc No

912-13903

Date

2022/04/29

Page

4 /26

PRODUCT USER GUIDE

www.acsip.com.tw

Introduction

1.1

General Description

AI7933CLD is a highly integrated IoT module that features an ARM® Cortex-M33 application processor,

a low power 1x1 802.11a/b/g/n/ac/ax dual-band Wi-Fi subsystem, a Bluetooth v5.0 subsystem, an

Audio subsystem with Cadence Tensilica HiFi4 processor and a Power Management Unit (PMU). The

Wi-Fi subsystem and a Bluetooth v5.0 subsystem offer feature-rich wireless connectivity at high

standards, and deliver reliable, cost-effective throughput from an extended distance.

The AI7933CLD

is designed to support standard based features in the areas of security, quality of service and

international regulations, giving end users the greatest performance any time and in any

circumstance.

The AI7933CLD is based on ARM® Cortex-M33 with floating point microcontroller (MCU) including

SRAM/ROM memory. The module also supports rich peripheral interfaces, including USB2.0, SDIO, SPI

master, I2C, I2S, IR input, UART, AUXADC, PWM, and GPIOs.

These features are used to download and debug a project on EK-AI7933CLD.

The front view of the EK-AI7933CLD including AI7933CLD module in Figure 1.

Figure 1. Front view of EK-AI7933CLD

AcS

ip C

onf

ide

ntia

AcS

ip C

onf

ide

ntia

AcS

ip C

onf

ide

ntia

Summary of Contents for EK-AI7933CLD




























Search results

Summary of Contents for EK-AI7933CLD

Reviews:

Related manuals for EK-AI7933CLD

Brands by name

Popular brands

AcSiP EK-AI7933CLD, User Manual

Search results

Summary of Contents for EK-AI7933CLD

Reviews:

Related manuals for EK-AI7933CLD

Brands by name

Popular brands