GSM-3000
ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57 | D- 84307 Eggenfelden | www.acs-controlsystem.de |
| 9 |
Example 1
The password of the RDT module is 123456789. The signal quality should be requested..
SMS message:
123456789;GSQ;
Response:
SQ=67
Result:
The signal quality is 67%
Example 2
No password is defined for the RDT module. The standby time 4 should be requested.
SMS message:
;GSB4;
Response:
SB4=2008-04-27 08:00:00,10080,5,0,1,0,0;
Result:
Standby time 4 is activated, start ti
me is 27.04.2008 at 08.00 o’clock.
Interval time 10080 minutes (= 1 week), standby duration 5 minutes.
PC data transmission deactive, state1 SMS active, state2 SMS deactive, FTP deactive
Example 3
The password of the RDT module is 123456789. The telephone number 1 should be requested, telephone
number 5 should be set to 016045678901 and date / time should be set to 08th May 2008, 10.05.30 o’clock.
SMS message:
123456789;GTN1;STN5=016045678901;SCLK=2008-05-08,10:05:30;
Response:
TN1=016098765432;STN5=OK;SCLK=OK;
Result:
The telephone number 1 is 016098765432.
The change of telephone number 5 resp. date and time is confirmed
Example 4
The password of the RDT module is 123456789. The module should be set to an enforced standby mode for
2 hours (=120 minutes). The state SMS should be sent.
SMS message:
123456789;SFSB=120;CSST1;
Response:
SFSB=OK;
Result:
The RDT module is as of now for the next two hours in standby mode.
The state SMS 1 is sent to the telephone number 1 for state SMS.
Example 5
The password of the RDT module is 123456789. An alarming message from the module was received per
SMS message. An acknowledgement should be sent.
SMS message:
Alarm measurement place Thames 119, measuring value 8,54 mWs, temperature 19,3 °C
Command:
123456789;CACK;
Result:
The alarming message is confirmed and thus no further alarming messages will be sent.
Example 6
No password is defined for the RDT module. The standby time 2 should be set with start time 07.4.2008 at
17.25 o’clock. The in
terval time is 1440 minutes (= 1 day) with standby duration 3 minutes.
PC data transmission active, state1 SMS deactive, state2 SMS active, FTP active, SNTP active
SMS message:
;SSB2=2008-4-07 17:25:00,1440,3,1,0,1,1,1;
Response:
SSB2=OK
Conclusion:
The activation and the setting of the standby time 2 is confirmed.
Note:
For a single standby time at a defined start time, this can be achieved by setting the
interval time to a very high value, e.g. 99 weeks.
