ACS APG8201-B2, Reference Manual

Page: 25 / 48

APG8201-B2
– Reference Manual
info@acs.com.hk
Version 1.00
www.acs.com.hk
Page 25 of 48
www.acs.com
.hk
Offset Field Size Value Description
14 bClockStop 1 00-03h
ICC Clock Stop Support:
00h = Stopping the Clock is not allowed
01h = Stop with Clock signal Low
02h = Stop with Clock signal High
03h = Stop with Clock either High or Low
Protocol Data Structure for Protocol T=1 ( bProtocolNum =1, dwLength =00000007h)
Offset Field Size Value Description
10 bmFindexDindex 1 -
B7-4
– FI – Index into the table 7 in
ISO/IEC 7816-3:1997 selecting a clock
rate conversion factor
B3-0
– DI - Index into the table 8 in
ISO/IEC 7816-3:1997 selecting a baud
rate conversion factor
11 bmTCCKST1 1
10h,
11h,
12h,
13h
For T=1, B7-2
– 000100b
B0
– Checksum type (b0=0 for LRC,
b0=1 for CRC)
B1
– Convention used (b1=0 for direct,
b1=1 for inverse)
12
bGuardTimeT1
1 00-FFh
Extra guardtime (0 to 254 etu between
two characters). If value is FFh, then
guardtime is reduced by 1.
13 bWaitingIntegerT1 1 00-9Fh
B7-4 = BWI
B3-0 = CWI
14 bClockStop 1 00-03h
ICC Clock Stop Support:
00 = Stopping the Clock is not allowed
01 = Stop with Clock signal Low
02 = Stop with Clock signal High
03 = Stop with Clock either High or Low
15
bIFSC
1 00-FEh Size of negotiated IFSC
16
bNadValue
1 00-FFh Nad value used by CCID
7.2.4. RDR_to_PC_Escape
This message is sent by APG8201-B2 in response to the command message PC_to_RDR_Escape .
Offset Field Size Value Description
0
bMessageType
1 83h -
1
dwLength
4 -
Size of abData field of this message
5 bSlot 1 -
Identifies the slot number for this
command. Same value as in Bulk-OUT
message.
6
bSeq
1 -
Sequence number for the corresponding
command. Same value as in Bulk-OUT
message.