ACS APG8201-B2, Reference Manual

Page: 20 / 48

APG8201-B2
– Reference Manual
info@acs.com.hk
Version 1.00
www.acs.com.hk
Page 20 of 48
www.acs.com
.hk
Offset Field Size Value Description
11 bTimeOut 1 -
Number of seconds. If 00h then CCID
default value is used.
12 bmFormatString 1 -
Several parameters for the PIN
format options
13 bmPINBlockString 1 -
Defines the length in bytes of the PIN
block to present in the APDU
command
14 bmPINLengthFormat 1 -
Allows the insertion of the PIN length
in the APDU command
15
wPINMaxExtraDigit
2 XXYYh
XX: Minimum PIN size in digit
YY: Maximum PIN size in digit
17
bEntryValidationCond
ition
1 -
The value is a bit wise OR operation:
01h: Max size reached
02h: Validation key pressed
04h: Timeout occurred
18
bNumberMessage
1
00h
01h
FFh
Number of messages to display for
the PIN Verification management:
00h: no string
01h: Message which index is
indicated
in bMsgIndex
FFh: default CCID message
19 wLangId 2 -
Language used to display the
messages
21
bMsgIndex
1 -
Message index in the Reader CCID
message table (should be 00h). The
message is the prompt for the user to
enter their PIN.
22 bTeoPrologue 3 -
T=1 I-block prologue field to use.
Significant only if protocol in use is
T=1.
25 abPINApdu
Byte
array
- APDU to send to the ICC
7.1.8.3. PIN Modification Data Structure
Offset Field Size Value Description
11 bTimeOut 1 -
Number of seconds. If 00h then CCID
default value is used.
12 bmFormatString 1 -
Several parameters for the PIN format
options
13
bmPINBlockString
1 -
Defines the length in bytes of the PIN
block to present in the APDU command
14
bmPINLengthForm
at
1 -
Allows the insertion of the PIN length in
the APDU command
15 bInsertionOffsetOld 1 -
Insertion position offset in byte for the
current PIN