ACS ALERT J4X, Instruction Manual, Page: 8 / 68

ALERT J4X 1
INTRODUCTION
Thank you for purchasing the ALERT J4X breath alcohol tester, a device designed for
industrial and traffic safety needs.
This tester accurately measures Breath Alcohol Concentration (BrAC). It may take up
to 60 minutes to reach the highest BrAC after the last consumption of alcohol.
Each person reacts uniquely to the consumption of alcohol and may become impaired
at a point below the legal limit.
DISCLAIMER
Sale of the ALERT J4X breath alcohol tester is on the express condition that neither the
manufacturer nor the vendor of the device shall be held responsible for the accuracy of
any breath test reading obtained from the device, nor liable for any loss, damage, injury
or other consequence resulting, directly or indirectly from the use thereof.
ASSISTANCE
Contact ACS for assistance:
Email: info@acs-corp.com
Website: www.acs-corp.com
SAFETY AND PRECAUTIONS
•
Use this tester for its intended purpose only
•
Do not blow smoke or fluids into the mouthpiece, as doing so may damage the
sensor
•
Be aware that alcohol is present in many products such as breath sprays,
mouthwash, medicines and in certain foods and beverages, which may distort the
BrAC result
•
Before testing, wait 20 minutes after drinking or eating and 3 minutes after smoking
•
Install AA batteries (alkaline or rechargeable) only
•
Turn the tester off before removing the batteries
•
Do not store this tester in extreme heat or extreme cold temperatures
•
Use the tester within the ambient temperature range of -5 to 40 °C
•
Do not disassemble the tester, as this may cause injury and void the warranty
•
Keep magnets or mobile devices away from the tester to minimize the potential of
electromagnetic interference
•
Always use a mouthpiece when blowing into the tester
•
When providing a breath test, do not cover the exhaust grid (left side of tester) with
your hand