ACS ALCOLOCK Focus, Installation And Service Manual

Page: 8 / 12

ALCOLOCK FOCUS 5
MONITORING
NOTE: The process detailed below should be completed concurrently with the “HS Monitor
Procedure, ITE Calibration and Monitor Transactions” process described in section 21.0 of
the LR installation and services manual (60-000249).
1. In the Service menu, scroll to Monitor and press Select . The handset screen will
display “Insert USB drive” .
2. Insert the USB drive into the USB cable (13-001144). Once the USB drive is
connected and detected by the camera, the image transfer from the camera
memory begins automatically.
NOTE: If the USB key still has files on it from previous use, the handset screen will
display “USB drive contains data”. Choose the “Delete” option to clear the USB.
Image transfer will then begin.
3. Once the image transfer has begun and is in progress, continue the standard in-
car monitoring procedure. Once the image transfer and standard in-car procedure
have been completed, the handset screen will display “Monitor Complete
Connect to PC”.
NOTE: If the standard monitoring procedure is completed before the image transfer
has completed, a message will appear on the handset indicating that more time is
needed.
4. Remove the USB drive and disconnect the handset.
5. Proceed with PC/ITE calibration and monitor transactions as outlined in section
21.4 of the LR installation and services manual (60-000249).
6. After the PC/ITE Monitoring transaction is complete, reconnect the handset to the
vehicle. The display will read “Drive out of garage” .
7. Remove the vehicle from the garage and instruct the client to sit in the driver’s
seat.
8. Verify that the camera is correctly angled to point at the client’s face while seated
in a normal driving position (as in Fig.1, see page 4) using the live feed on the
handset, and that the position of the ALCOLOCK Focus camera has not been
moved since the initial installation.
9. Approve the image by pressing the left button.
10. Complete the monitoring process.