ACS ACR89U-A1, Reference Manual

Page: 29 / 57

ACR89U-A1 – Reference Manual
info@acs.com.hk
Version 1.04
www.acs.com.hk
Page 29 of 57
Response Code Value Description
INVALID_COMMAND_CODE FFFEh Command code in the extended command
(offset 10) is invalid.
INVALID_COMMAND_LENGTH FFFDh Wrong length in the extended command.
CANNOT_EXECUTE_COMMAND FFFCh Extended command cannot be executed.
TIMEOUT FFFBh Timeout for executing the extended
command.
SCRIPT_ERROR FFFAh Cannot execute the script.
Return State Value Description
CMD_OK 00h Command executes successfully
CMD_FAIL 01h Command execution failed
Error Code Value Description
COMMAND_NOT_SUPPORT 00h
Command code in the extended command
(offset 10) is not supported.
HARDWARE_ERROR 01h Hardware error occurred.
ACCESS_DENIED 02h
Function is denied according to current
configuration.
ADDRESS_ERROR 03h Address parameter is not correct.
FRAME_ERROR 04h Command frame format is not correct.
CHECKSUM_ERROR 05h Check sum for data part is not correct.
3.6. CCID Interrupt-IN Message
The Interrupt-IN endpoint is used to notify the host of events that may occur asynchronously and
outside the context of a command-response exchange between host and ACR89. ACR89 shall follow
the CCID Interrupt-IN Messages as specified in standard CCID Rev 1.1 session 6.3. This section lists
the CCID Interrupt-IN Messages to be supported by ACR89.
3.6.1. Message Summary
3.6.1.1. RDR_to_PC_NotifySlotChange
This message is sent whenever ACR89 detects a change in the insertion status of an ICC slot.
Offset Field Size Value Description
0 bMessageType 1 50h -