ACS ACR1255U-J1, Reference Manual

Page: 58 / 73

ACR1255U-J1 – Reference Manual
info@acs.com.hk
Version V1.01
www.acs.com.hk
Page 58 of 73
6.6.6. Set LED and Buzzer Status Indicator Behavior
This command is used for setting the behaviors of LEDs and buzzer as status indicators.
Note: The setting will be saved into non-volatile memory.
Set LED and Buzzer Status Indicator Behavior Format (6 bytes)
Command Class INS P1 P2 Lc Data In
Set LED and Buzzer
Status Indicator Behavior
E0h 00h 00h 21h 01h
Default
Behavior
Behavior (1 byte)
Behavior Mode Description
Bit 0 RFU RFU
Bit 1 PICC Polling Status LED
To show the PICC Polling Status.
1 = Enable; 0 =Disable
Bit 2 PICC Activation Status LED
To show the activation status of the
PICC interface
1 = Enable; 0 =Disable
Bit 3
Card Insertion and Removal
Events Buzzer
To make a beep whenever a card
insertion or removal event is detected.
1 = Enable; 0 =Disabled
Bit 4 – 6 RFU RFU
Bit 7 Card Operation Blinking LED
To light up the LED whenever the card
is being accessed
Note: Default value of behavior = 8Fh.
Set LED and Buzzer Status Indicator Behavior Response Format (6 bytes)
Response Class INS P1 P2 Le Data Out
Result E1h 00h 00h 00h 01h Default Behaviors