
А1020 MIRA Lite Low-Frequency Ultrasonic Tomograph
Operation Manual
15
ACOUSTIC
CONTROL
SYSTEMS
1.3.4 Tomograph controls and indication of the state
The left and right handles of the antenna array have two buttons for ultrasonic testing (the "START" buttons). Press any key
to start the process of transmission and reception of signals.
NOTE:
TO RECEIVE THE CORRECT TEST RESULTS DO NOT MOVE AND DO NOT RELEASE THE HOLD-DOWN LEVER WHILE
COLLECTING DATA!
1.3.4.1 Using the icon
The interface of the device is structured as an associative icon menu located in six rectangular windows at the bottom
of the screen. The icons are symbolic images associated with the object or the function they control. Every mode has its
own icon set.
The icons can be either active or passive. In the active state it is possible to adjust the functions or parameters of the device
associated with the active icon.
ATTENTION:
HEREINAFTER WE USE THE ENUMERATION OF THE ICON WINDOWS AND THEIR ASSOCIATED FUNCTIONAL
KEYS FROM 1 TO 6, FROM LEFT TO RIGHT!
1.3.5 Operation modes
The device has two operation modes: REVIEW and MAP, and the service SETUP mode.
The REVIEW mode is used for on-line viewing of the internal structure of the object in the selected places. The В Scan is
displayed on the screen.
Additionally, in this mode, the following is possible:
- automatic detection of ultrasonic wave propagation velocity in the surface layer of the material;
- measurement of coordinates and levels of images in a tomogram;
- thickness measurement of the object;
- viewing the А Scans.
1