manualshive.com logo in svg

ACS A1020 MIRA Lite, Operation Manual

Share
Download
ACS A1020 MIRA Lite Operation Manual Download Page 10

А1020 MIRA Lite Low-Frequency Ultrasonic Tomograph

Operation Manual

10

ACOUSTIC 

CONTROL 

SYSTEMS

1.3.1.1 Electronic unit

The appearance of the electronic unit is presented in the Figure 2. A membrane keyboard allows to control the device. 

All signals, measurement results and the state of the device are indicated on the display by means of LED lights on the 
housing of the device.

The matrix antenna array is connected to the ports located on the right side of the housing.
The device is powered by means of the removable battery or a power adapter included in the delivery kit. The battery or the 

power adapter is connected to the port on the back of the housing.

On the back of the housing there is also a USB port for PC-interfacing.

1.3.1.2 Power adapter

AC power supply adapter (15V) powers the de-

vice from external energy source and allows charging 
of the battery installed into the electronic unit of the 
device.

The battery charging time is up to 6 hours 

depending on the degree of its discharge. During 
charging the device remains fully operable.

To avoid damage of the device, always first con-

nect the cable of the power adaptor to the electronic 
unit, then connect the network cable to the power 
adaptor, and then connect the network cable to the 
mains.

WARNING: 

THE DISASSEMBLING OF THE REMOV-

ABLE BATTERY BY THE USER IS PROHIBITED!

1

Figure 2

Summary of Contents for A1020 MIRA Lite













































Reviews:

No comments

Brands by name

Popular brands

Load more brands