ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
4
1. Brief description
2
1. Brief description
The panel meter
M3-1M
is a 5-digit device for connection to a 4-wire-measuring bridge with calibration
contact (80% alignment) and a visual threshold value monitoring via the display. The configuration happens
via four front keys or via the optional PC software PM-TOOL. An integrated programming interlock prevents
unrequested changes of the parameters and can be unlocked again by an individual code. Optional the
following functions are available: a 10 V bridge feeding, a digital input for the triggering of Hold (Tara) or the
80%-alignment, two analog outputs, one interface, as well as two or four galvanic isolated setpoints, by
which free adjustable threshold values can be controlled and reported to a superior master display.
The electrical connection is carried out on the back side via plug-in terminals.
Selectable functions like e.g. the request of the min/max-value, an average determination of the measuring
signals, a direct change of threshold value in operation mode and additional measuring supporting points for
linearisation complete the modern device concept.
1. Brief description
2
1. Brief description
The panel meter
M3-1M
is a 5-digit device for connection to a 4-wire-measuring bridge with calibration
contact (80% alignment) and a visual threshold value monitoring via the display. The configuration happens
via four front keys or via the optional PC software PM-TOOL. An integrated programming interlock prevents
unrequested changes of the parameters and can be unlocked again by an individual code. Optional the
following functions are available: a 10 V bridge feeding, a digital input for the triggering of Hold (Tara) or the
80%-alignment, two analog outputs, one interface, as well as two or four galvanic isolated setpoints, by
which free adjustable threshold values can be controlled and reported to a superior master display.
The electrical connection is carried out on the back side via plug-in terminals.
Selectable functions like e.g. the request of the min/max-value, an average determination of the measuring
signals, a direct change of threshold value in operation mode and additional measuring supporting points for
linearisation complete the modern device concept.
The panel meter instrument DAL-311 is a 5-digit device for connection to a 4-wire-measuring bridge with calib-
ration contact (80% alignment) and a visual threshold value monitoring via the display. The configuration hap-
pens via 4 keys at the front or via the optional PC software PM-TOOL. The integrated programming interlock
prevents unrequested changes of parameters and can be unlocked again with an individual code. Optional the
following functions are available: a supply for the sensor, a digital input for triggering of Hold (Tara), two analog
outputs and interfaces for further evaluating in the unit.
With help of the galvanic isolated setpoints (optional), free adjustable limit values can be controlled and
reported to a superior master display.
The electrical connection is done via plug-in terminals on the back side.
Selectable functions like e.g. the recall of the min/max-value, an averaging of the measuring signals, a
nominal presetting or setpoint presetting, a direct threshold value regulation during operation mode and
further measuring setpoints for linearisation, complete the modern device concept.
