ANR-DNV3N3 Series
7
I/O
Front Panel
• 3x 2.5” SATA3 SATA[1:3] Hot-swappable Bay
•
1x Graphic LCM Display
• 1x Navigation Joystick for LCM
•
2x USB 3.0
•
3x SYSTEM LED
•
1x RESET Button
•
1x USB-console (Micro-B)
•
1x RJ-45-console
•
1x GbE RJ-45 Copper LAN[0]
•
8x GbE RJ-45 Copper LAN[1:8]
•
1x GbE SFP Fiber SFP[1] with 4x GbE PoE RJ-45
Copper(For C3758)
• 2x SFP+(10G Fiber) for C3558 or
4x SFP+(10G Fiber) for C3758 or above
•
1x Acrosser Hot-swappable Exp. NIM. (For C3758 and
above SoC, not available when PCIe slot is used)
Rear Panel
•
1x Exp. PCIe Gen3 x8 slot (support
F
ull
H
t-
H
alf
L
en PCIe
Add-In Card) (For C3758 and above SoC, not available
when Exp. NIM is used)
•
2x Smart Cooling Fan
•
1x Power Switch
•
1x VGA
• Single ATX 250WPSU or 1+1 Redundant 300W PSU
(C3858 & C3958)
Internal I/O
•
3x SATA3
•
1x PCIe Gen3 (x8 slot, x8 Signal) (For Expansion
module or Exp.PCIe slot )
•
ATX 24-pin Power Input
•
ATX 12V 8-pin Power Input
•
1x on board pin header for LCM
•
1x on board pin header for PIC update
•
1x on-board pin-header for I2C
•
1x on-board pin-header for PMBus
•
2*5 pin 2.54mm for 8-bit GPIO (4-In, 4-Out)
•
1x on-board pin-header for VGA
•
1x on-board pin-header for SYSTEM LEDs
Other Features
Watchdog Timer
•
Software programmable 0~255 Seconds, 0=disable
timer.
Battery
•
Lithium Battery, 3V 220mAH (CR2032), for RTC
