AND-DNV3N3 Series
25
Version 2.19.1266. Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Advanced
COM0
Console Redirection Settings
Terminal Type
Bits per second
Data Bits
Parity
Stop Bits
Flow Control
VT-UTF8 Combo Key Support
Recorder Mode
Resolution 100x31
Putty KeyPad
Emulation: ANSI:
Extended ASCII char
set. VT100: ASCII char
set. VT100+: Extends
VT100 to support color,
function keys, etc.
VT-UTF8: Uses UTF8
encoding to map Unicode
[VT100+]
[115200]
[8]
[None]
[1]
[None]
[Enabled]
[Disabled]
[Disabled]
[VT100
•
Terminal Type
Use this item to select the preferred terminal emulation type for out-of-band
management.
• Bits per second
Use this item to select the serial port transmission speed. The speed used in the
hostcomputer and the client computer must be the same. Long or noisy lines may
require lowertransmission speed. he options include [9600], [19200], [57600] and
[115200].
• Data Bits
Use this item to set the data transmission size. he options include [7] and [8] (Bits).
•
Parity
Use this item to select the parity bit. he options include [None], [Even], [Odd], [Mark]
and [Space].
• Stop Bits
The item indicates the end of a serial data packet. he standard setting is [1] Stop Bit.
Select [2] Stop Bits for slower devices.
•
Flow Control
Use this item to set the f low control to prevent data loss from buffer overf low.
Whensending data, if the receiving bufers are full, a “stop” signal can be sent to stop
the datalow. Once the bufers are empty, a “start” signal can be sent to restart the
low. Hardwarelow uses two wires to send start/stop signals. he options include [None]
and [HardwareRTS/CTS].
