manualshive.com logo in svg

Acroprint ATR9800, Reference Manual

Share
Download
Acroprint ATR9800 Reference Manual Download Page 50

ATR9800 User Guide

48 Clock Configurations

Display Messages

The display messages tab is used to change the default clock messages. Each field will allow
for 20 alphanumeric characters.

The “Idle Prompt Top and Bottom Lines” are what is displayed on the clock display.

“Invalid Source ” is displayed when trying to use an input source that has been disabled.

“Invalid Badge” is displayed when using a badge of invalid length.

“Please Try Again” is displayed when the clock misreads a registration attempt.

“Enter Function” is displayed when a badge above the max swipe and go number is swiped.

Access Always On- is displayed during the period that access is always granted. This period is
defined under Clocks/ Access Control.

Access Always Off- is displayed during the period that access is always denied. This period is
defined under Clocks/ Access Control.

Print Setup

The print setup tab is used when printing clock transactions at the clock. This is used to print
the transactions and does not take the place of the printer attached to the PC. When using an
attached printer you can:

Print Transactions - indicates to the clock to print each transaction.

Up to 2 Header Lines- these lines can be used as descriptors for departments, jobs, etc.

# of lines for Line Feed - indicates the number of lines to fed after printing each
transaction.

Summary of Contents for ATR9800





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands