Acroprint ATR9800 Reference Manual Download | Manualshive

Page: 21 / 68

background image

ATR9800 User Guide

Time Transactions 19

The employee data includes the employee number, name and the transaction date being viewed in
the display window. It also includes detailed information about the transaction.

Division Code: Indicates the division the employee is assigned. The division number is linked
to the employee's assigned schedule.

Valid Badge: Indicates the badge is valid in the system and shows the badge number.

Source: Indicates the source of the transaction. Swiped denotes it was polled from the clock.
Manual denotes it is a manual entry entered from this screen.

Clocked: Y indicates the transaction came from the clock, N indicates it came from the
computer.

Changed: Indicates this transaction has been changed or edited.

Changes: The actual number of times this transaction has been changed.

Supervisor: Y indicates the transaction was entered at the time clock by a supervisor badge
through supervisor entry mode. N indicates a normal transaction. The maintenance screen also
shows time totals applied to that day’s transaction. It is calculated on the transactions shown
only in the transaction window. Any add/edits made to time transactions reflect an immediate
change in the time totals.

Totals are based on the employee's assigned schedule and are calculated according
to that schedule's rules. Totals may appear to be incorrect, so please refer to the
employees' schedule to check schedule rules. Do not make changes to schedules
unless you are sure of their function.

«
...
19
20
21
22
23
...
»

Summary of Contents for ATR9800





































































Reviews:

No comments

Related manuals for ATR9800

SCX 4500 - B/W Laser - All-in-One

Brand: Samsung Pages: 21

SCX 4828FN - Laser Multi-Function Printer

Brand: Samsung Pages: 38

SCX 4725FN - B/W Laser - All-in-One

Brand: Samsung Pages: 33

Brand: Xerox Pages: 204

LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS

Brand: Adobe Pages: 90

Brand: Aastra Pages: 46

CERTIFICATE SYSTEM 8 - AGENTS GUIDE

Brand: Red Hat Pages: 146

VANTAGE CNM 2.0 -

Brand: ZyXEL Communications Pages: 346

Brand: Extron electronics Pages: 37

DSP/BIOS Real-Time Analysis

Brand: Texas Instruments Pages: 29

Brand: 3Com Pages: 144

GPS Information

Brand: Globalsat Pages: 7

Crown Document Option Commands

Brand: MINOLTA-QMS Pages: 134

PHOTO EXPRESS MD 5345

Brand: Ulead Pages: 43

FLASH MX 2004-LEARNING FLASH

Brand: MACROMEDIA Pages: 122

TASCAM PCM Recorder

Brand: Tascam Pages: 2

FREEFLOW 701P46740

Brand: Xerox Pages: 38

Brand: Canon Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands