Acroprint ATR9800 Reference Manual Download | Manualshive

Page: 47 / 68

background image

ATR9800 User Guide

Fingerprint Unit 45

Fingerprint Unit

If you are using the fingerprint unit in conjunction with the clock, the fingerprint parameters must
be entered at this tab. With the FIU unit (Fingerprint Identification Unit) each transaction is
validated with the employee fingerprint before the transaction is processed.

Fingerprint Unit Use Level: This entry turns on the FIU circuitry within the clock. It also sets
the reader sensitivity level, 5 being the most sensitive and 1 being the least sensitive.

Max. of Fingerprints: Indicates the maximum number of fingerprints to use. This entry can be
from 1 to 999.

# of fingerprints per Badge: Each badge can be used with up to three fingerprints. If badges are
assigned more than one fingerprint, the maximum number is decreased. Using two fingerprints
per badge, the maximum number that can be used is 499; with three fingerprints per badge, the
maximum number is 333.

FIU Security Code: This number is used to identify the reader that is attached to a particular
clock. Once programmed with this number that reader must remained attached to that clock. If
another FIU reader is used with the clock an error will occur.

Timeout to Read Fingerprint: Indicates the maximum amount of time the FIU reader will
attempt to recognize the fingerprint. This entry is entered in tenths of a second. Example: an entry
of 10 = 1 second.

«
...
45
46
47
48
49
...
»

Summary of Contents for ATR9800





































































Reviews:

No comments

Related manuals for ATR9800

NG Network Access Client SP4

Brand: Barracuda Networks Pages: 268

Brand: Yamaha Pages: 37

eXpress Altris eXpress Helpdesk Solution 5.6 SP1

Brand: altiris Pages: 143

DATA SYNCHRONIZER

Brand: Novell Pages: 50

Brand: AMX Pages: 16

PlateRunner P24 Processor

Brand: Xante Pages: 6

Brand: ASCOM Pages: 28

Brand: Pioneer Pages: 11

Brand: Cpanel Pages: 221

Brand: Crestron Pages: 12

Brand: Black Box Pages: 65

Brand: Nexo Pages: 24

RAPTOR 1100T - X11R6.1 FOR AIX

Brand: Tech Source Pages: 40

Brand: LEI Extras Pages: 8

Brand: LEI accessories Pages: 116

Over Loud Guitar FX Plug-in Suite

Brand: Focusrite Pages: 8

Loopfactory AN200

Brand: Yamaha Pages: 72

SPSS Data Collection

Brand: IBM Pages: 179

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands