V108
Operation Manual, Xymba XB-42
© 2008, Acronova Technology, Inc.
23
Xymba is showing an error on the LED display. What should I
do?
If Xymba is showing an LED error please remove all the discs in
the loader. Be sure to check for any discs that may be stuck
inside the unit.
Press the SAFE button and hold for five seconds to restart Xymba.
You can also turn the power switch to the Off position and back to
the On position after waiting 30 seconds.
Xymba may continue to show an LED error. After trying the
above suggestions with no result press and hold the FUNC button
until you see the LED display change. Please record the new
LED message.
Next press and hold the TEST button until the LED display
changes again. Please record the new LED message. Please
provide this information to the dealer along with the Xymba serial
number located on the bottom of the unit.
