Operation Manual, Xymba XB-42
V108
10
© 2008, Acronova Technology, Inc.
Important:
The Finish Disc Bin must be in position during operation.
Removing the Finish Disc Bin will stop Xymba from operating
immediately after the current disc being written to has completed.
Rear View
Power Socket
Use the provided power
cord to connect Xymba to
a wall outlet.
Power Switch
Turn Xymba on and off.
Ventilation
This allows heat to escape.
Do not block this otherwise
the unit may overheat.
Control Panel
High-Speed Duplication
Press to start the duplication process at
the highest possible write speed to
produce discs at the maximum
production rate.
Safe-Speed Duplication
Press to start normal speed duplication.
This increases quality but decreases
output rate. Recommended for audio
and video discs.
Function Key
Press this button to activate or
deactivate disc verification during the
duplication process.
Test/Abort
Press to abort the current duplication process or to start a
duplication simulation.
Important:
The High-Speed Duplication mode will use the maximum recorder
speed but may be limited by the write speed of the disc
