Version 1.2
Operation Manual, Nimbie USB Plus
O
PERATION
Q
UICK
G
UIDE
Follow the steps below to get your Nimbie USB Plus ready.
Turning Nimbie USB Plus On
1)
Connect the power cord to Nimbie USB Plus and a wall outlet.
2)
Turn on the host computer, which is connected to Nimbie USB
Plus via USB 3.0 port.
3)
Connect USB 3.0 cable to both Nimbie USB Plus and your PC.
4)
Turn Nimbie USB Plus’s power switch to the On position.
5)
Wait for the robotic initialization process to complete, then the
“ready” indicator will light up.
6)
Launch application software.
Refer to application software user's guide for operation
directions
For details on software operation, please check out application
software user's guide.
Turning Nimbie USB Plus Off
Unplug the USB cable which connects your host PC and Nimbie USB
Plus. Then, turn the power switch to the Off position. In case there is
a session underway, abort or wait until it has completed.
We recommend that you unplug the cord for safety when Nimbie USB
Plus is not used for extended periods of time.
© 2012, Acronova Technology, Inc.
19
