Operation Manual, Nimbie USB Plus
Version 1.2
I
NSTALLATION
Finding a Place for Nimbie USB Plus
Nimbie USB Plus should be placed on a fairly level surface, firm
enough to support the unit and discs. Always allow ample workspace
for your operation, with easy access to the blank and finished discs.
Do not expose the unit to direct sunlight or high humidity, as it may
cause the unit to malfunction.
If you desire, Nimbie USB Plus can be placed on a raised block so
there is ample room to receive discs from the Finish Disc Slot. Please
refer to the “More Than 30 Discs in One Session” section for details.
Attaching the Legs
Inserting one leg after another on Nimbie’s base, match the leg to
Nimbie and gently snap the leg into the receptacle until it is firmly
attached.
To remove the legs, gently press the
notch and pull it outward from the
receptacle.
12
© 2012, Acronova Technology, Inc.
