Model TT339-0700
4-Wire Isolated Frequency Transmitter w/USB
Acromag, Inc. Tel: 248-295-0880
[
18
]
http://www.acromag.com
Connections...
NOTE:
You should already have power connected to the
transmitter. You will not be able to configure, calibrate, or test
the transmitter without power applied.
After executing the Acromag Configuration software for this
transmitter, the window shown at left will appear, if you have
not already connected to the transmitter via USB (note fields
are blank under these conditions).
Connect your PC to the transmitter via USB, and the
transmitter’s model-serial information will appear in the device
field as shown in the second window at left.
If you happen to be connected to more than one transmitter via
a USB hub, you can use the device scroll field to select another
transmitter, using the serial information suffix of the model
number to discern one transmitter from another.
Select a transmitter from the drop down menu. When you click
on a transmitter name from the drop down menu, the software
will automatically attempt to open a connection with the
selected transmitter. If the software does not have an open
connection with the transmitter, click the
[Open]
button to
open a connection with the transmitter.
After opening a connection to a transmitter, the transmitter’s
Model, Serial Number, Manufacturer, and connection status will
be displayed as shown in the image on the left. In addition, the
Status field will indicate “Device opened successfully” as shown
in the image at left.