INDUSTRIAL I/O PACK SERIES APC8620/8621 PCI BUS CARRIER BOARD
___________________________________________________________________________________________
- 12 -
ENVIRONMENTAL
Operating Temperature.................0 to +70
°
C;
-40 to +85
°
C (E Versions)
Relative Humidity..........................5-95% non-condensing
Storage Temperature....................-55 to +100
°
C.
Non-Isolated...........................…...PCI bus and IP module logic
commons have a direct
electrical connection. As such,
unless the IP module provides
isolation between the logic and
field side, the field I/O signals
are not isolated from the PCI
bus.
Radiated Field Immunity (RFI)......Designed to comply with
IEC1000-4-3 Level 3 (10V/m at
frequencies 27MHz to 500MHz)
and European Norm
EN50082-1.
Electromagnetic Interference
Immunity (EMI)…..............…........No digital upset under the
influence of EMI from
switching solenoids,
commutator motors, and drill
motors.
Electrostatic Discharge
Immunity (ESD)…..............….......Complies with IEC1000-4-2
Level 1 (2KV direct contact
discharge) at field input/output
terminals and European Norm
EN50082-1.
Surge Immunity…………………...Complies with IEC1000-4-5,
Level 2 (1KV) and European
Norm EN50082-1 at field input/
output terminals.
Electric Fast Transient
Immunity EFT..……………….......Complies with IEC1000-4-4
Level 2 (1KV power terminals;
0.5KV at field input and output
terminals) and European
Norm EN50082-1.
Radiated Emissions………..……..Meets or exceeds European
Norm EN50081-1 for class A
equipment.
APPENDIX
CABLE: MODEL 5025-550-x (Non-Shielded)
MODEL 5025-551-x (Shielded)
Type: Flat Ribbon Cable, 50-wires (female connectors at both
ends). The ‘-x’ suffix designates the length in feet (12 feet
maximum). Choose shielded or unshielded cable according
to model number. The unshielded cable is recommended for
digital I/O, while the shielded cable is recommended for
optimum performance with precision analog I/O applications.
Application: Used to connect Model 5025-552 termination panel
to carrier board 50-pin field connectors.
Length: Last field of part number designates length in feet (user-
specified, 12 feet maximum). It is recommended that this
length be kept to a minimum to reduce noise and power loss.
Cable: 50-wire flat ribbon cable, 28 gage. Non-Shielded cable
model uses Acromag Part 2002-211 (3M Type C3365/50 or
equivalent). Shielded cable model uses Acromag Part 2002-
261 (3M Type 3476/50 or equivalent).
Headers (Both Ends): 50-pin female header with strain relief.
Header - Acromag Part 1004-512 (3M Type 3425-6600 or
equivalent). Strain Relief - Acromag Part 1004-534 (3M Type
3448-3050 or equivalent).
Keying: Headers at both ends have polarizing key to prevent
improper installation.
Schematic and Physical Attributes: For Non-Shielded cable
model, see Drawing 4501-462. For Shielded cable model,
see Drawing 4501-463.
Shipping Weight: 1.0 pound (0.5Kg), packed.
CABLE: MODEL 5029-943
Type: Model 5029-943 IP500 Communication Cable: A five foot
long, flat 50-pin cable with a female connector on one end
(for connection to carrier board) and four DE-9P connectors
(serial ports) on the other end.
Application: Used to connect up to four DB-9 serial ports to
carrier board connectors. It is used primarily with Acromag
Model IP500, IP501, & IP502 serial communication modules.
Length: 5 feet.
Cable: 50-wire flat ribbon cable, 28 gage. Non-Shielded cable
model uses Acromag Part 2002-211 (3M Type C3365/50 or
equivalent).
Headers: 50-pin female header with strain relief. Header -
Acromag Part 1004-512 (3M Type 3425-6600 or equivalent).
Strain Relief - Acromag Part 1004-534 (3M Type 3448-3050
or equivalent).
Port Connectors: Four DE-9P (9-pin, D-SUB, Male) connectors
with strain relief (3M connector U89809-9000 with 3448-
8D09A strain relief, or equivalent).
Keying: 50-pin Header at one end has polarizing key to prevent
improper installation.
Shipping Weight: 1.0 pound (0.5Kg) packaged.
TERMINATION PANEL: MODEL 5025-552
Type: Termination Panel For Carrier Boards
Application: To connect field I/O signals to the Industrial I/O
Pack (IP). Termination Panel: Acromag Part 4001-040
(Phoenix Contact Type FLKM 50). The 5025-552 termination
panel facilitates the connection of up to 50 field I/O signals
and connects to the carrier boards via a flat ribbon cable
(Model 5025-550-x or 5025-551-x). The field connectors on
the carrier board connect the I/O signals to the P2 connector
on each of the Industrial I/O Pack modules. Field signals are
accessed via screw terminal strips. The terminal strip
markings on the termination panel (1-50) correspond to P2
(pins 1-50) on the Industrial I/O Pack (IP). Each Industrial I/O
Pack (IP) has its own unique P2 pin assignments. Refer to
the IP module manual for correct wiring connections to the
termination panel.
Schematic and Physical Attributes: See Drawing 4501-464.
Field Wiring: 50-position terminal blocks with screw clamps.
Wire range 12 to 26 AWG.
Connections to Carrier: P1, 50-pin male header with strain relief
ejectors. Use Acromag 5025-550-x or 5025-551-x cable to
connect panel to carrier board. Keep cable as short as
possible to reduce noise and power loss.
Mounting: Termination panel is snapped on the DIN mounting
rail.
Printed Circuit Board: Military grade FR-4 epoxy glass circuit
board, 0.063 inches thick.
Operating Temperature: -40
°
C to +100
°
C.
Storage Temperature: -40
°
C to +100
°
C.
Shipping Weight
: 1.25 pounds (0.6kg) packed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com