AP5080E / AP580-POE AcroPack
USER
’S MANUAL
Acromag, Inc. Tel: 248-295-0310
- 5 -
http://www.acromag.com
- 5 -
https://www.acromag.com
•
Interrupt moderation, VLAN support, IP checksum offload
•
PCIe OBFF (Optimized Buffer Flush/Fill) for improved system power
management
•
Four transmit and four receive queues
•
RSS and MSI-X to lower CPU utilization in multi-core systems
•
Advanced cable diagnostics, auto MDI-X
•
ECC
–
error correcting memory in packet buffers
1.3.3 Key Features PCIe Interface
•
PCIe Bus
–
The AP module includes a PCI Express Generation 1 interface
operating at a bus speed of 2.5 Gbps with one lane in each direction.
•
Compatibility
–
PCI Express Base Specification v2.1 compliant PCI Express
Endpoint.
1.4 Signal Interface Products
This AcroPack Module will mate directly to all Acromag AP carriers. Once
connected, the module is accessed via a 50 pin or 68 pin panel connector.
The cables and termination panels are also available.
1.5 Software Support
The AcroPack series AP580 require support drivers specific to your operating
system. Supported Operating Systems include: Windows and Linux.
These Device Drivers are typically native to the operations systems and
require no additional special drivers to operate.
The AP580 uses the Intel i210 Ethernet controller PROset drivers.
For more information go to:
https://downloadcenter.intel.com/product/64399/Intel-Ethernet-Controller-
I210-Series
1.6 Introduction
The AP580E-LF provides a single port Ethernet connection which is capable
of data rates 10, 100 0r 1000 Mbps (megabits per second). The AP580E-POE-
LF is an optional model which adds POE (Power Over Ethernet) This makes
the AP580E a power sourcing equipment device (PSE) that provides 52VDC
up to 10Watts of power to Powered Devices (PD) such as a Video camera and
VOIP phones or any other PD device
