Acrel Co.,Ltd
Address: No.253 Yulv Road, Jiading district,Shanghai,China
Tel: 021-69156352 E-mail: [email protected]
Figure 5
If the setted general addresses get lost, it can be read through universal
address 255 (when networking communication, must use general address).
III
Modify baud rate
As shown in Figure 6, when the meter communicates normally, select the
required baud rate in the drop-down box on the right side of "set baud rate",
and click "set baud rate" button to save the baud rate after selection.
Figure 6
When the dialog box shown in Figure 7 pops up, the setting is successful.
Figure 7
IV It is not recommended to click the data and power reset button if there is no
special need.
V Ratio setting and reading
