Y1-03-0138U
6
standard "F" type television connectors. The connector on the back of
the Point Pad™ is located in the center of the panel for ease of
installation.
After the coax cable has been routed and the “F”
connectors attached to the coax cable, simply screw the “F”
connectors to the Master Controller and the Point Pad™. The cable
and connectors are available either through ACR Electronics, your
local Radio Shack or other sources of electronic hardware.
Additional Point Pads™ (up to three (3) Pads) may be used with one
(1) Master Controller. A standard "T" connector or RG-59 television
type "splitter" is used for each additional Point Pad
(
see Figure 2
).
Limit the total length of all coax cable used to 300 feet.
The URP-
102 Point Pad™ is backwards compatible with all RCL-
100/50 Searchlights and with the URC-101 Master Controller.
NOTE:
The URP-
102 Point Pad™ is not recommended for use with
the first generation URC-100 Master Controllers.
