manualshive.com logo in svg

ACR Electronics GlobalWatch 2 AIS, User Manual, Page: 54 / 70

Share
Download
ACR Electronics GlobalWatch 2 AIS User Manual Download Page 54

 

 

 

GlobalWatch

2

TM

 AIS User Manual  

53 

Version 1.0 

Sensor Settings 

 
The screen provides the means to switch the sensor speeds. It allows the user to change sensor 
interfaces from IEC61162-1 to IEC61162-2 settings. The data input fields are fitted with default 
values. The [Up], [Down] buttons are used for menu navigation, the [Left] or [Right] buttons for 
default data input. 

 

 

 
 

 

Dynamic Keys: Sensor Settings

 

[M5]     [Save]

 

Save Data Input 

[M8]   

 

[Back]    

Return to Menu  
Configuration 

 
 

N 1^20' E  0^13' |1>0.10|2>1.30| *    1L

*********** Sensor Settings ************ 

                                         

                                         

BaudRate Sensor1:<4800>                  

BaudRate Sensor2: 4800                   

BaudRate Sensor3: 38400                  

                                         

                                         

                                         

                                         

                                         

                                         

                                         

---------------------------------------- 

   |  Save  |         |         |  Back

 

Y1-03-0182-1A

Summary of Contents for GlobalWatch 2 AIS







































































Reviews:

No comments