manualshive.com logo in svg

ACR Electronics GlobalWatch 2 AIS, User Manual

Share
Download
ACR Electronics GlobalWatch 2 AIS User Manual Download Page 25

 

 

 

GlobalWatch

2

TM

 AIS User Manual  

24 

Version 1.0 

 

f)  Long Range Interrogation 

 
Mobile, and shore-based stations have the ability to interrogate vessels and make requests for 
information over the “Long Range Interface”. The interrogated vessel can either reply in automatic, 
or in manual mode. The interrogation request is displayed in both modes.  
 
The arrival of a Long Range Interrogation Request is indicated by:   
 

1L 

 on the top right hand corner of the Navigation Screen. The LRI automatically arrives in the 

Message Inbox LRI and can be handled from there. 

 
 

 

 
 

 
Handling a Long Range Interrogation (LRI) 

 
Default Settings for LRI Requests:  

 
Automatic Mode

: 

The LRI is automatically dealt with and own vessel data is sent. 

Manual Mode:  

 

The LRI needs to be manually handled. 

 

 

Note: 

The data which may be interrogated via the Long Range Interface can be configured in Menu 5:  
Configuration, Submenu 5: Interrogation Settings. 

LAT:N  1^20.256'ExtSOG:34.6kn    *    1L

LON:E  0^13.700'IntCOG:173.0^   07:44:49 

IntGPS: 3D      ExtHDT:222^ Reg6 SRM  /B 

001/021..ShipName....RNG.BRG..SOG..COG.. 

1>DOREEN-----------> N/A 120 22.2 301.5  

2>FINE EAGLE------->0.00 N/A 13.1 359.9  

3>SYLVAEPSILON----->0.10  23 32.1 203.2  

4>ESSOTOKYO-------->0.43  99 10.0 120.3  

5>OLYMPIAHIGHWAY FE>0.59 342 21.2  50.0  

6>SANEI------------>0.80 272 32.1 270.1  

7>KATOO------------>1.00 321 21.2 200.8  

8>OLYMPIA PALACE--->1.34 277 [BASESTAT]  

9>MINILOG---------->1.96 201 21.7 102.2  

10>ALIBRAHIMYA----->2.66 340 22.1  30.3  

11>ATLANIC--------->2.75 121  N/A  N/A   

12>BWRTZ123-------->3.36  66 24.1   2.9>

 

Y1-03-0182-1A

Summary of Contents for GlobalWatch 2 AIS







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands