TROUBLESHOOTING
Problem
Possible Cause
Corrective Action
Pump does
not start or
run
Pump
operates but
pumps little or
no water
1. Blown fuse
2. Tripped breaker
3. Plug disconnected
4. Corroded plug
5. Thermal overload
6. Motor failed
7. Float switch obstructed
8. Float switch failed
1.Replace fuse
2.Reset breaker
3.Secure plug
4.Clean plug prongs
5.Unplug for 30 minutes, then plug in
6.Call 800-201-1360
7.Make sure the float switch has room to
move and is not getting caught on
anything. Make sure your pit is at least
14 in. wide.
8.Purchase a replacement float switch
at the store
1. Screen blocked
2. Impeller loose on shaft
3. Impeller broken
1. Clean screen
2. Reassemble impeller
3. Call 800-201-1360
WARNING:
disassembling may cause an oil leak or dangerous electrical wiring issues.
Do not disassemble the motor housing. This motor has NO repairable internal parts, and
