ACP XpressChef JET514A, Service Manual

Page: 21 / 41

21
SERVICE MODE
TO ENTER SERVICE MODE:
1. Press the Menu Pad. Menu Setting Prompt Appears
2. Press the Scroll Down Pad
3.
Press “2”. “Service Menu” (five choices appear)
4. At the Pin Prompt, Enter 1,3,5,7,then 9. (the first page of two will appear)
Software Version is displayed.
1. Usage
a. Door Cycles
b. Tube Cycles
c. Tube Hours
2. Error History. Displays any Accumulated Error Codes with the most
Recent at the Top.
3. Pin Code. Reveals Pin Code Set for Programming
4. Export to USB. Exports the Usage Information, Error History, and
Recipe/Settings File to a USB Flash Drive. Note: The
Recipe/Settings File will be in .xml format. Usage and Error History
will be in .txt formats.
5. Voltage Sensing ( Disabled on some Models and should
not be tampered with unless Factory advised)
1
– Force 208
2
– Sense (DEFAULT)
3
– Force 230
Press the “Scroll Down” Pad (five more choices appear)
1. Temp Offset For Oven Temperature Calibration. A Positive Offset
equals a Hotter Oven. Offset is always displayed in Fahrenheit.
Range is -40 to +40.
2. Heater. Start and Stop the Heating Element for Service Testing
3. Magnetron. Displays High Voltage System Amperage when
Started. Normal Range approximately 15 Amps. Start and Stop
the System for Service Testing
4. Convection Fan. Start and Stop the Convection Fan Motor for
Service Testing.
5. Cooling Fan. Start and Stop the Convection Fan Motor for
Service Testing
MENU
SCROLL
UP