ACP OMNISTIM FX2 Patient User Manual Download Page 7

OMNISTIM

®

 FX

2

 PORTABLE PENS PATIENT USER MANUAL 

- 5 - 

COPYRIGHT © 2008 - 2021, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED 

 

 

 

 

Stimulation should not be applied directly over external stimulator systems with lead wires

 

 

Neuromuscular electrical stimulation (NMES) should not be applied directly over or in 

close proximity to Deep Vein Thrombosis (DVT), as it activates the muscle and causes 

muscle contractions. This should be avoided in tissue following an acute DVT when the 

thrombosis is not completely resolved. Therapists should follow the guidelines provided 

by the referring physician on recommended activity level and modality use. If the patient 

is not permitted exercise, NMES therapy should be avoided.  Generally, NMES over a 

DVT of six weeks or less should be avoided altogether.

 

 

Precautions 

 

The safety of electrical stimulation during pregnancy has not been established;

 

 

Some  patients  may  experience  skin  irritation  or  hypersensitivity  due  to  the  electrical 

stimulation or electrical conductive medium. The irritation can usually be reduced by using 

an alternate conductive medium, or alternate electrode placement.

 

 

Application site and settings should be based on the guidance of the prescribing practitioner.

 

 

All equipment and accessories should be kept out of the reach of children or unqualified 

persons.

 

 

Do not connect this device to any wall outlet that has not been properly grounded, or to any 

electrically non-isolated medical device Powered muscle stimulators should be used only 

with the leads and electrodes recommended for use by the manufacturer. Use this device 

only with the leads, electrodes, and accessories recommended by the manufacturer. Use only 

ACP specified accessories and/or supplies with ACP devices. Do not use any power cords, 

or power supplies, other than the ones provided or specified for this device. Use of any other 

power supply could seriously damage the device and will void the warranty.

 

 

The use of conductive mediums other than specifically approved pre-gelled or self-adhering 

electrodes such as ultrasound gel or lotion, hand or body lotion, electrolyte spray mist, paper 

towels, non-approved reusable or disposable pre-gelled or self-adhering electrodes— are not 

advised for use with Omnistim Systems.

 

 

When cleaning the device, never immerse them or wash them with water. See the infection 

control section in this manual for cleaning instructions. Devices should not be submerged in 

water or other liquids.

 

 

Failure to follow the manufacturer’s prescribed maintenance for this device may lead to 

device failure and transient or unreliable performance.  State and federal survey and JCAHO 

require  all  equipment  to  be  maintained  and  calibrated  according  to  the  manufacturer 

recommended schedules.

 

 

A potential electric shock hazard exists once the device outer casing has been in part, or 

fully,  removed.  Only  qualified  service  personnel  should  perform Service  and  repairs. 

Warranty will be voided if the outer casing has been removed or tampered with.

 

 

Use caution when the patient has a tendency to bleed internally, such as following an injury 

or fracture. Do not apply over areas of hemorrhage or active bleeding.

 

 

Inspect and cleanse the skin prior to application. Following treatment check the skin for 

evidence of irritation or burns, and if present, treat as appropriate.  If the patient has, or 

complains of, skin irritation following treatment; shorten the treatment time on the next 

treatment session, or use an alternative type of therapy or electrode placement.

 

 

Gradually increase the output intensity/power to required dose or patient tolerance while 

monitoring the device display.

 

Summary of Contents for OMNISTIM FX2






















Reviews: