©2019 ACP, Inc.
Cedar Rapids, IA 52404
Page 17 of 22
Part No. 20267401
Original Instructions
STYLES 2 & 3
Operation and Programming
Manual Time Entry
Allows operator to heat without changing the preset program
keypads.
1. Open oven door and place food in oven. Close door.
•
Display shows “READY”
2. Press the TIME ENTRY keypad
•
Display shows “00:00” and “READY”
3. Press number keypads to enter the desired cook time.
• If keypad is not pressed within 60 seconds, open and
close oven door again.
4. Press POWER LEVEL keypad to select power level.
Press a number keypad to adjust the power level, or press
POWER LEVEL keypad again to reset to 100%.
•
Style 2:
Display shows “% MW POWER” and current
power level if other than 100 percent power.
•
Style 3:
Display shows “COOK LEVEL” and current
power level if other than 100 percent power.
5.
To enter additional cooking stages:
Repeat steps 2-4
for each additional cooking stage.
•
Up to four different stages can be programmed.
6. Press START keypad to begin cooking
Quantity X2 Keypad
To increase cooking time when cooking more than one serving.
1. Open oven door and place food in oven. Close door.
•
Display shows “READY”
2. Press X2 keypad.
• Amount of time added is a percentage of the original
preset cooking time.
• The percentage can be changed. See Programming
section in this manual.
3. Press desired preprogrammed keypad.
4. Oven begins cooking and displays remaining cooking time.
Programming Mode
Allows operator to assign cook times, power levels, and stage
cooking to the number keypads.
1.
Open oven door and press and hold number keypad “1”
for 5 seconds. The oven beeps.
•
Style 2:
Display shows “PROGRAM”
•
Style 3:
Display shows “P:0”
Note: If STOP/RESET keypad is pressed before
programming is complete,changes are discarded and
microwave exits programming mode.
2. Select the keypad(s) to change or review the program
cooking sequence.
•
Single Digit Keypad Cooking
: press a keypad (0-9)
•
Double Digit Keypad Cooking
: press the two keypads,
in order, of the double digit number for the desired
cooking sequence.(00-99)
3. Press number keypads to enter the desired cook time.
4. Press POWER LEVEL keypad to select power level.
Press a number keypad to adjust the power level, or press
POWER LEVEL keypad again to reset to 100%.
•
Style 2:
Display shows “% MW POWER” and current
power level if other than 100 percent power.
•
Style 3:
Display shows “COOK LEVEL” and current
power level if other than 100 percent power.
5.
To add additional cooking stages:
Press TIME ENTRY
keypad. Then repeat steps 3-4 for each additional cooking
stage.
•
Up to four different stages can be programmed.
6.
To save the cooking program:
Press START keypad
7.
To exit programming mode:
Press STOP/RESET
keypad or close oven door.
Quantity X2 Programming
This feature allows a preset percentage of original cook time,
called a cook factor, to be added to a cook sequence.
TO EDIT THE COOK FACTOR:
1.
Open oven door and press and hold number keypad “1”
for 5 seconds. The oven beeps.
2. Select the keypad(s) to reprogram.
3. Press the X2 keypad.
4. Press a number keypad to change the cook factor.
Examples:
•
Pad 5 would change the cooking factor to 50%.
•
Pad 3 would change the cooking factor to 30%.
5. Press START keypad to save changes.
