background image

  

 

 

 

Quick Start Reference Guide

 

Changing user options

Options such as single or double pad programming and beep volume can be changed to suit individual preferences.

To change options:

1.  Press and hold pad 2 for approximately 5 seconds with door open.

2.   Option appears in display.

•  Oven is now in options mode.

3.  Press number pad that controls option to be changed.

•  See table below for options.

•  Current option will display.

4.  Press number pad again to change the option.

•  Each time pad is pressed, option will change.

•  Match code displayed with code for desired option.

•  Changes take affect after START pad is pressed.

•  To change additional options, repeat steps 3 and 4.  

5.   Press START pad to return to Options. Open and close oven door or press STOP to exit.

Numbered Pads

Display

Options (Factory Settings in Bold)

1

End of Cycle Beep

OP:10

OP:11

OP:12

3 second continuous beep.

 Continuous beep until done disappears.

 Repeating 5 beeps bursts until door is opened.

2

Speaker Volume

OP:20
OP:21

OP:22

OP:23

Eliminates beep.
Sets volume to low.

Sets volume to medium.

Sets volume to high.

3

Key Beep

OP:30

OP:31

Prevents beep when pad is pressed.

Allows beep when pad is pressed.

4

Keyboard Enable 

Window 

OP:40
OP:41

OP:42

OP:43

  15 seconds after oven door is closed, keyboard disabled.
  30 seconds after oven door is closed, keyboard disabled.

  1 minute after oven door is closed, keyboard disabled.

  2 minutes after oven door is closed, keyboard disabled.

5

End of Cycle Message 

Time

OP:50
OP:51

OP:52

OP:53
OP:55
OP:56

10 seconds

20 seconds

30 seconds

40 seconds
60 seconds
1 minute 10 seconds

6

    Stop during 

cooking cycle

OP:60

OP:61
OP:62

Pressing stop clears information, opens door.

Pressing stop pauses oven with door closed.
Pressing stop pauses oven with door open

.

7

Maximum Cook

OP:70

OP:71

Allows 5 minutes of heating time.

Allows 10 minutes of heating time.

8

Time Entry

OP:80

OP:81

Allows use of preprogrammed pads only. 

Allows use of manual time entry and preprogrammed pads.

9

Double Digit Operation

OP:90

OP:91

Allows 10 (0-9) preprogrammed pads.

Allows 100 (00-99) preprogrammed pads.

5 second beeps once.

OP:13

OP:14

OP:15

Continuous beep until stop pad is pressed or door is cycled.

Repeating 5 beeps burst until stop pad is pressed or door is cycled. 

OP:57

1 minute 20 seconds

OP:58

1 minute 30 seconds

OP:59

1 minute 40 seconds

Time Entry

OP:16

No beep.

0

ON-THE-FLY Cooking

OP:00

OP:01

Disables ON-THE-FLY Cooking.

Allows ON-THE-FLY Cooking.

Central Distribuidora Ojeda

Avenida 5 (eje 3 ote) Num. 19a Colonia: Granjas San Antonio c.p. 09070 Delegacion Iztapalapa México Distrito Federal

www.cdo.com.mx

[email protected]  

 

 

Telefonos: (0155) 2453 8899 ext. 205, 208, 209, 212

Summary of Contents for AOC5241

Page 1: ...ng sequences 1 Place food in oven Close door 2 Press desired pad 3 Oven begins to cook 4 At end of cooking cycle oven door opens Refer to Product Safety Manual for Safety Statements The switching operation of this microwave oven can cause voltage fluctuations on the supply line The operation of this oven under unfavorable voltage supply conditions can have adverse effects This device is intended f...

Page 2: ...ween air discharge on back of oven and back wall Note Back to back installation allows correct clearance Oven Clearances Quick Start Reference Guide Troubleshooting Tips If the door does not open after a cooking cycle Press the stop button If door still does not open press stop again If door still remains closed gently pull door forward to open manually If this continues to be an issue please cont...

Page 3: ... Glide Strips Clean Monthly 1 Unplug the oven 2 Clean in between door arms and side of cavity with a cloth Do not use paper towels on the end of a non metallic spatula with mild detergent or degreaser cleaning the glide strips on both sides of the cavity 3 Place door back in ready position by gently pushing downward Important Do not use abrasive cleaners or cleaners containing ammonia or citrus Ne...

Page 4: ...er oven door is closed keyboard disabled 30 seconds after oven door is closed keyboard disabled 1 minute after oven door is closed keyboard disabled 2 minutes after oven door is closed keyboard disabled 5 End of Cycle Message Time OP 50 OP 51 OP 52 OP 53 OP 55 OP 56 10 seconds 20 seconds 30 seconds 40 seconds 60 seconds 1 minute 10 seconds 6 Stop during cooking cycle OP 60 OP 61 OP 62 Pressing sto...

Reviews: