background image

4

The UNI-Protractor is a versatile alignment and 

positioning instrument for use with phono  

tonearms and cartridges. It allows precise  

alignment of any given tonearm to any tangential 

curve desired.

Furthermore the user can determine whether a 

given mounted tonearm does meet any correct  

calculated tangential curve – i.e. whether it is  

correct mounted or aligned.

This applies to all tonearms – no matter what 

effective length, mounting distance or specific 

geometry a given tonearm may ask for.

The user can measure, align and determine  

all positioning parameters related to the  

geometrical/mechanical alignment of a cartridge-

tonearm combination.

The UNI-Protractor set consists of the 
following parts:

− the UNI-Protractor metal main frame with the    

   micrometer linear drive

− 3 POM tt-spindle adapters for diameters 7.10,  

   7.15 and 7.20 mm

− clear acrylic positioning arm for mounting 

 

   distance 8“ - 14“

− 1 locator to be mount in positioning arm – 

 

   1 round reticle - with white haircross    

   lines 

− metal frame magnifier 

− a selection of 3 mm mirrored parallax templates  

   for tangential curve alignment

− clear acrylic 8 mm vertical azimuth template

− 

overhang gauge

− stainless steel metric ruler w/.5mm scale to  

   determine the mounting distance P2S

− 

cold light LED lamp  

A brief introducton

!

 

Please check your UNI-Protractor set. All the 

above parts must be included to ensure perfect 

function.

Each UNI-Protractor was carefully checked and 

tested prior to shipment.

Please do get yourself familiar to the handling and 

use of the UNI-Protractor. 

While it is a mechanical positioning instrument, it 

needs a minimum of attention to detail by the user 

to obtain the maximum precise results it ensures if 

handled correctly.

To get access to all possible features of the UNI-

Protractor it is inevitable to read this manual. 

But most important please study the step-by-step 

pictured instruction to learn how to set-up the 

UNI-Protractor correctly.

Attention

 

Due to the very tight tolerances - some are indeed 

tight fit – some parts of the UNI-Protractor have 

to be put in place in a certain sequence. These 

tight tolerances are mandatory to achive true 

precision. When you receive the UNI-Protractor, 

make sure to give it enough time to adapt to room 

temparature. 

This is important for perfect function.

DISCLAIMER

 

Please use all parts with care -  
especially when your cartridge sits  
on the template.

The azimuth template is particular  
sensitive to fall due to mechanic shock.

The use of the UNI-Protractor is on  
your own risk. The manufacturer and 
the designer do not take any respon-
sibility for damage due to operate or 
handle the  
UNI-Protractor or any of it’s parts.

Keep out of reach of children !!

!

Summary of Contents for UNI Protractor

























Reviews: