13
Step 10
Please insert the positioning arm into the linear
drive. There is a matching notch in the top
of the black POM block – the moving part of the
linear drive. Do insert the positioning arm there.
Press it down gently so to make contact with the
bottom of the notch.
Step 11
Do locate the pivot center of your tonearm. Do
position the center of the reticle or the tip of the
pin there. Now do tighten the 2 screws to fix the
positioning arm in place.
You have now completed positioning of your
UNI-Protractor for the template in action.
Please make sure the platter of your turntable does
NOT move during the following steps.
