background image

3

Your Aluminium Bluetooth speaker with FM Radio should be treated with care.  The 
information below has been provided in the interest of safety and will help you to enjoy this 
product and the benefits it brings for many years. 

•  Keep the product and all its parts out of reach of small children.
•  This product is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have 
been given supervision or instruction concerning the use of the appliance by a person 
responsible for their safety. 

•  Keep it dry.  Avoid exposure to precipitation, humidity and liquids which could all affect 

the product circuitry.

•  Do NOT leave it in high temperatures as electronic devices and plastic parts may warp in 

heat.

•  Do NOT leave it in low temperatures as moisture can form inside the product, which may 

damage the circuit board.

•  Do NOT store in dusty or dirty areas.
•  Do NOT block or cover slots, holes or openings on the product by placing on soft 

furnishings such as carpets, rugs or beds as these are provided for functionality and/or 
ventilation to ensure safe operation of the product 

•  Disconnect your Aluminium Bluetooth speaker from the mains power supply during 

thunderstorms. 

•  Always check that you have completely switched off your Aluminium Bluetooth speaker, 

before you change or disconnect the power supply.

•  Only use the power supply that came with the product. Using an unauthorised power 

supply will invalidate your guarantee and may irrecoverably damage the product.

•  Where the mains power plug or an appliance coupler is used as the disconnect device, 

the disconnect device shall remain readily operable.

•  Do NOT attempt to open the product.  This product does not contain any user serviceable 

parts. Unauthorised handling of the device may damage it and will void your warranty.

•  Do NOT use your Aluminium Bluetooth speaker near emergency/intensive care medical 

equipment; if you have a pacemaker fitted or during an electrical storm.

•  Do NOT use harsh chemicals, cleaning solvents or detergents to clean the product.  Wipe 

with a damp (not wet) soft cloth to clean.

•  If the remote control will not be used for a long period of time, make sure that the battery 

is removed from the battery compartment.

•  Only use recommended batteries or those of the same equivalent type.
•  Do not mix old and new batteries or batteries of different types. 

 Important safety information

Summary of Contents for 4144845





















Reviews: